Hmmm...let me ask a strange question: Can a Raspi 400 be used as a
keyboard?
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a keyboard?
Thx
FW
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a keyboard?
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a
keyboard?
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a
keyboard?
Using USB ? Nope, as as far as I know you can't change its USB "master"
mode into "client" mode (as the Pi Zero can). Though, as mentioned, you could always look at some extra hardware perhaps emulating an USB keyboard
at one side and getting fed with 7 bits + strobe, I2C or SPI..
Alternatively, the PiKVM software allows the Pi to be a USB keyboardExcuse me please, I am not a native english speaker.
and supply keystrokes from a browser window.
Am 02.06.2022 um 15:09 schrieb Theo:
Alternatively, the PiKVM software allows the Pi to be a USB keyboardExcuse me please, I am not a native english speaker.
and supply keystrokes from a browser window.
I understand the words but not the meaning: supply keystrokes from a
browser window? You mean I start a firefox with Linux and type into its canvas?
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a keyboard?
That fully depends on how you want to connect it to the other device.
Using USB ? Nope, as as far as I know you can't change its USB "master"
mode into "client" mode (as the Pi Zero can). Though, as mentioned, you could always look at some extra hardware perhaps emulating an USB keyboard
at one side and getting fed with 7 bits + strobe, I2C or SPI..
Using Bluetooth ? Possibly, but you would need to be able to set it up in "client" mode (which actually initiates the connection). If that is not possible you could take a peek at the multitude of (very cheap) BlueTooth modules that you can buy.
Using a PS/2 or even older Philips 5-pin plug ? Possibly, as the 400 /should/ be fast enough to drive the pins by way of its own I/O pins.
RS232 ? Yep, the 400 has got four hardware drivers.
Using USB ? Nope, as as far as I know you can't change its USB "master" mode into "client" mode (as the Pi Zero can). Though, as mentioned, you could always look at some extra hardware perhaps emulating an USB keyboard at one side and getting fed with 7 bits + strobe, I2C or SPI..
You are absolutely right. I did not think about that.
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a keyboard?
Directly, no.
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a keyboard?
Hmmm...let me ask a strange question: Can a Raspi 400 be used as a
keyboard?
Thx
FW
Hmmm...let me ask a strange question: Can a Raspi 400 be used as aNot without some keys to press..
keyboard?
Thx
FW
On 02/06/2022 07:40, F. W. wrote:
Hmmm...let me ask a strange question: Can a Raspi 400 be used as aNot without some keys to press..
keyboard?
Thx
FW
On Sat, 4 Jun 2022 13:30:10 +0100, The Natural Philosopher wrote:
On 02/06/2022 07:40, F. W. wrote:
Hmmm...let me ask a strange question: Can a Raspi 400 be used as aNot without some keys to press..
keyboard?
Thx
FW
... which the Pi400 has, being a keyboard with an internal 4GB Pi 4 and
what looks like all Pi 4 interfaces connected to sockets on its rear edge.
Ah. Missed that. Seems an expensive way to make a cheap keyboard.
That fully depends on how you want to connect it to the other device.
you should have stopped there, as that's the only thing you said
that's not wrong, largely because it's meaningless.
false. it can easily be done, and without any additional hardware.
details in another post.
Using Bluetooth ? Possibly, but you would need to be able to set it
up in "client" mode (which actually initiates the connection). If that
is not possible you could take a peek at the multitude of (very cheap)
BlueTooth modules that you can buy.
this is also false. bluetooth is certainly an option, also without any additional hardware.
Using a PS/2 or even older Philips 5-pin plug ? Possibly, as the 400
/should/ be fast enough to drive the pins by way of its own I/O pins.
ps/2? hah. 1990 wants you back.
RS232 ? Yep, the 400 has got four hardware drivers.
that's even more hilarious. perhaps 1990 is not far enough. you might
also want to learn about how rs-232 actually works, because it needs
more than 'four hardware drivers'. just sayin'..
Using USB ? Nope, as as far as I know you can't change its USB
"master"
mode into "client" mode (as the Pi Zero can). Though, as mentioned,
you
could always look at some extra hardware perhaps emulating an USB
keyboard
at one side and getting fed with 7 bits + strobe, I2C or SPI..
You are absolutely right. I did not think about that.
he's wrong.
Using USB ? Nope, as as far as I know you can't change its USB
"master"
mode into "client" mode (as the Pi Zero can). Though, as mentioned,
you
could always look at some extra hardware perhaps emulating an USB
keyboard
at one side and getting fed with 7 bits + strobe, I2C or SPI..
You are absolutely right. I did not think about that.
he's wrong.
As always, not underbuild or explained, and as such absolutily meaningless.
And actually ? I think I'm more right than wrong there.
The only thing I
missed was an USB-to-go option on the 400.
But you just could not pass up
a chance to bash me and make it sound as if that invalidates everything I said there.
And by the way, I have no problem with taking Theos and that randomnerdtutorials.com websites word for it that it actually does exist.
I do not even have the urge to double-check it.
In contrast I would not even believe you if would tell me that the sun comes up in the east.
For anyone who's wondering whats going on, nospam has taken a dislike to me, 'cause I do not let him get away with continuous usage of hollow claims
and other shennigans.
That fully depends on how you want to connect it to the other device.
you should have stopped there, as that's the only thing you said
that's not wrong, largely because it's meaningless.
As always, not underbuild or explained, and as such absolutily meaningless.
I thought it was a good idea to make the OP (and respondants) aware that there are more ways to do what he asked for. You know, giving options.
false. it can easily be done, and without any additional hardware.
details in another post.
Its always easy to bash someone with something /someone else/ came up with, isn't it.
The only thing you've shown that I do not know everything about everything.
In further news it has been concluded that water is wet.
Using Bluetooth ? Possibly, but you would need to be able to set it
up in "client" mode (which actually initiates the connection). If that >> is not possible you could take a peek at the multitude of (very cheap)
BlueTooth modules that you can buy.
this is also false. bluetooth is certainly an option, also without any additional hardware.
:-) you might want to re-read what I said there.
"forgetting" about the first part of what you quoted yourself just makes you look stupid - or someone who doesn't let details like that stop him from making accusations.
Using a PS/2 or even older Philips 5-pin plug ? Possibly, as the 400
/should/ be fast enough to drive the pins by way of its own I/O pins.
ps/2? hah. 1990 wants you back.
Arrogance has called, it want to fight you to get their lost title back.
Kid, its about what the *OP* might want or need, not you.
RS232 ? Yep, the 400 has got four hardware drivers.
that's even more hilarious. perhaps 1990 is not far enough. you might
also want to learn about how rs-232 actually works, because it needs
more than 'four hardware drivers'. just sayin'..
As always, not underbuild or explained, and as such absolutily meaningless. just sayin'..
You obviously have no idea what I ment with "hardware drivers" in this context, but that didn't stop you drom jumping to the (percieved) chance to again bash me with it.
Suggestion : find yourself the specs of the 400 and check out its RS232 capabilities. Than compare it to what the Pi 3 range offers, and see if you can spot the difference.
Using USB ? Nope, as as far as I know you can't change its USB
"master" mode into "client" mode (as the Pi Zero can). Though,
as mentioned, you could always look at some extra hardware perhaps
emulating an USB keyboard at one side and getting fed with 7 bits
+ strobe, I2C or SPI..
You are absolutely right. I did not think about that.
he's wrong.
As always, not underbuild or explained, and as such absolutily
meaningless.
it was explained in another post, which you are deliberately ignoring.
And actually ? I think I'm more right than wrong there.
actually, you're not. you're not even close.
the solution is very simple, with only a usb cable needed.
The only thing I
missed was an USB-to-go option on the 400.
you missed quite a bit more than that, nor is that even relevant.
you invited it by saying things that had little to no validity.
In contrast I would not even believe you if would tell me that the sun
comes up in the east.
there are some people who have seen the sun rise in the west.
maybe you can figure out how it happened, although i doubt it.
For anyone who's wondering whats going on, nospam has taken a dislike to
me,
'cause I do not let him get away with continuous usage of hollow claims
and other shennigans.
no, it's because you don't like when you're cornered and your claims
shown to be nonsensical or flat out false.
that's fine, except you neglected to mention any options that
would actually work and be helpful to the op.
nothing more than a lot of word-salad to make it look like you
know what you're talking about (and you don't).
Its always easy to bash someone with something /someone else/ came up
with, isn't it.
it's easy when it's wrong and unhelpful.
if it's correct, then no bashing is needed.
only thanks.
not applicable here.
The only thing you've shown that I do not know everything about
everything.
that's a start.
In further news it has been concluded that water is wet.
not always.
<https://www.sciencedaily.com/releases/2010/08/100825174102.htm>
Carter explained that the substance became known as "dry water"
because it consists of 95 percent water and yet is a dry powder.
"forgetting" about the first part of what you quoted yourself just makes
you
look stupid - or someone who doesn't let details like that stop him from
making accusations.
nothing has been forgotten.
it's clear that you don't actually know how one would turn a pi
400 into a bluetooth keyboard.
ps/2? hah. 1990 wants you back.
Arrogance has called, it want to fight you to get their lost title back.
Kid, its about what the *OP* might want or need, not you.
where did you get the idea i wanted anything?
the fact is that usb has been around for more than 20 years.
if he wanted ps/2 (or rs-232 for that matter), he would have said so.
You obviously have no idea what I ment with "hardware drivers" in this
context, but that didn't stop you drom jumping to the (percieved) chance
to
again bash me with it.
you're assuming facts not in evidence again.
not that it matters since the likelihood that he wants an rs-232
keyboard is zero.
nospam has taken a dislike to me,
Please take it to email.
The rest of us aren't interested in the same old protagonists having
endless arguments about whether black is white.
In further news it has been concluded that water is wet.
not always.
<https://www.sciencedaily.com/releases/2010/08/100825174102.htm>
Carter explained that the substance became known as "dry water"
because it consists of 95 percent water and yet is a dry powder.
Funny how even the first line of your quoted tells you not once but
*twice* that its "dry". The word "wet" doesn't appear /anywhere/ in that same article.
druck,
Please take it to email.
How ? You've obviously not checked both his and my email addies.
Besides, giving ones email address to random entities, especially ones that do not like you, is wrought with problems, none of which I desire to have.
The rest of us aren't interested in the same old protagonists having
endless arguments about whether black is white.
Than set the subthread between nospam and myself to hidden. Problem solved.
And oh, the next time you want to complain about something, do yourself a favour and /at least/ check out what is going on.
On 06/06/2022 20:04, R.Wieser wrote:
druck,
Please take it to email.
How ? You've obviously not checked both his and my email addies.
Besides, giving ones email address to random entities, especially ones that >> do not like you, is wrought with problems, none of which I desire to have.
Point taken, perhaps I should have suggested shoving this up your
collective rear-ends instead.
Everyone here can see what is going on, you've made your point, now stop feeding the troll.
Maybe people who hide their email address, feel they can be an arse with impunity. I'm also continually amazed at the TRIVIA that people can get
wound up about.
On Mon, 06 Jun 2022 21:38:16 +0000, Jim Jackson wrote:
[snip]
Maybe people who hide their email address, feel they can be an arse with
impunity. I'm also continually amazed at the TRIVIA that people can get
wound up about.
Obligatory xkcd: https://xkcd.com/386/
Than set the subthread between nospam and myself to hidden. Problem
solved.
Except having to regularly block copious volumes of argumentative
nonsense, only serves to put people off using this newsgroup for genuine Raspberry Pi discussions.
Everyone here can see what is going on, you've made your point, now stop feeding the troll.
Obligatory xkcd: https://xkcd.com/386/
Correct me if I'm wrong, but I just realized something from the above : is the reason you are responding to me (and not nospam) because my post is the only one you're seeing ? He's already been put in the doghouse by you and others ?I am certainly not seeing his posts.
But, if you think so you only have to prove, underbuild or even just explain why none of the ones I mentioned will work - which you never will. You simply do not have that kind of knowledge.
In further news it has been concluded that water is wet.
not always.
<https://www.sciencedaily.com/releases/2010/08/100825174102.htm>
Carter explained that the substance became known as "dry water"
because it consists of 95 percent water and yet is a dry powder.
Funny how even the first line of your quoted tells you not once but *twice* that its "dry". The word "wet" doesn't appear /anywhere/ in that same article.
The whole problem is that I *cannot* have an argument (discussion) with nospam, because he won't /ever/ give me anything specific that could be the basis of a discussion. Just a never-ending stream of "you're wrong" /
"you don't know anything" claims, never underbuild.
You don't need to take my word for that either
Using USB ? Nope, as as far as I know you can't change its USB
"master" mode into "client" mode (as the Pi Zero can). Though,
as mentioned, you could always look at some extra hardware perhaps
emulating an USB keyboard at one side and getting fed with 7 bits
+ strobe, I2C or SPI..
You are absolutely right. I did not think about that.
he's wrong.
As always, not underbuild or explained, and as such absolutily
meaningless.
it was explained in another post, which you are deliberately ignoring.
You said "he's wrong." You did not explain what, how or why. You still haven't.
the solution is very simple, with only a usb cable needed.
Who said that the OP wanted an USB cable solution ?
In contrast I would not even believe you if would tell me that the sun
comes up in the east.
there are some people who have seen the sun rise in the west.
maybe you can figure out how it happened, although i doubt it.
I'm sure I cannot. Maybe you could explain it ? It would be a small step for mankind if you did.
i provided a link that turns a pi 400 into a keyboard, *exactly* what
was requested,
what do you think 'dry' means?
hint: dry = not wet.
You said "he's wrong." You did not explain what, how or why. You still
haven't.
i did. do try to keep up.
The whole problem is that I *cannot* have an argument (discussion)
with nospam, because he won't /ever/ give me anything specific that
could be the basis of a discussion. Just a never-ending stream of
"you're wrong" / "you don't know anything" claims, never underbuild.
that's false. i've provided a lot of specifics in various threads,
with references when appropriate, which you either do not understand
and think it means something different or you just ignore it.
Yes:
Install the distro from https://pikvm.org/ onto an SD card
Power it up in your Pi
Go to the website served from your pi, eg https://pikvm.local/
Log in
Theo schrieb:
Yes:
Install the distro from https://pikvm.org/ onto an SD card
Power it up in your Pi
Go to the website served from your pi, eg https://pikvm.local/
Log in
Thanks, that's a cool project. I just wathced the video they linked. If had known about this, my colleagues had been able to save a lot of money isntead of buying KVM switches from Dell.
| Sysop: | deepend |
|---|---|
| Location: | Calgary, Alberta |
| Users: | 240 |
| Nodes: | 10 (0 / 10) |
| Uptime: | 16:46:55 |
| Calls: | 1,464 |
| Files: | 3,372 |
| Messages: | 360,539 |